Chapter 4 Configuring SPA9000 Features

Using the Wizard to Configure SPA9000 Voice Features

Step 2 Configure the lines that you want to share and click Submit.

Configuring a Call Hunt Group

A hunt group is a number of extensions that ring when a number is dialed. The call is answered by the first extension that picks up the call. Extensions can be alerted simultaneously or sequentially. See the description of the <Hunt Groups> and the <Contact List> parameters about how to specify a hunting rule. Note that <Contact List> is a per line interface parameter and is applicable to that line interface only. For information about using the administration web server to configure hunt groups, see the “Using Call Hunt Groups” section on page 4-19.

To use the Setup Wizard to configure a hunt group, complete the following steps.

Step 1 Select Hunt Group from the Advanced Feature Menu (see Figure 4-8).

Figure 4-8 Hunt Group Option

The system displays the page shown in Figure 4-9.

 

Linksys SPA9000 Administrator Guide

4-6

Document Version 3.01

Page 96
Image 96
Cisco Systems SPA9000 manual Configuring a Call Hunt Group, Hunt Group Option