|
| Chapter 6 SPA9000 Field Reference |
|
|
|
| |
| SIP Tab |
|
|
|
|
| |
EXT IP | External IP address to substitute for the actual IP address of the SPA9000 in all outgoing | ||
|
| SIP messages. If 0.0.0.0 is specified, no IP address substitution is performed. | |
|
| If this parameter is specified, the SPA9000 assumes this IP address when generating SIP | |
|
| messages and SDP (if NAT Mapping is enabled for that line). However, the results of | |
|
| STUN and VIA received parameter processing, if available, supersede this statically | |
|
| configured value. | |
|
| The default is 0.0.0.0. | |
|
|
| |
EXT RTP Port Min | External port mapping number of the RTP Port Min. number. If this value is not zero, the | ||
|
| RTP port number in all outgoing SIP messages is substituted for the corresponding port | |
|
| value in the external RTP port range. | |
|
| The default is 0. | |
|
|
| |
NAT Keep Alive Intvl | Interval between | ||
|
| The default is 15. | |
|
|
| |
PBX Parameters |
|
| |
|
|
| |
Field | Description | ||
|
| ||
Proxy Network Interface | This setting tells the SPA9000 how the client stations are connected. Choices: {LAN, | ||
|
| WAN}. Default is WAN. The SPA9000 communicates with client stations via the selected | |
|
| interface only. | |
|
| ||
Proxy Listen Port | Port at which the SPA9000 listens for client messages at the selected network interface. | ||
|
| The proxy also sends SIP messages from this port. | |
|
| The default is 6060. | |
|
| ||
Multicast Address | IP address (and port number) where the SPA9000 sends control messages to all the client | ||
|
| stations at once. This must be a multicast address and must contain a port number. | |
|
| The default is 224.168.168.168:6061. | |
|
| ||
Group Page Address | IP address (and port number) where the SPA9000 tells the client stations to send and | ||
|
| receive group page RTP packets. This must be a multicast address and must contain a port | |
|
| number. | |
|
| The default is 224.168.168.168:34567. | |
|
| ||
Max Expires | Sets the maximum allowed Registration expires value in seconds for client stations. | ||
|
| Linksys recommends using a smaller value, such as 60 or 120. | |
|
| The default is 3600. | |
|
| ||
Force Media Proxy | Forces external client stations to use the SPA9000 Media Proxy when exchanging RTP | ||
|
| traffic with external peers. Linksys recommends using a smaller value, such as 60 or 120. | |
|
| The default is no. | |
|
|
|
|
| Linksys SPA9000 Administrator Guide |
Document Version 3.01 |
