Chapter 6 SPA9000 Field Reference
Line 1/2/3/4 Tab
EXT SIP Port
Enter the port number of the external port to substitute for the actual SIP port of the SPA9000 in all outgoing SIP messages.
The default is 0.
Proxy and Registration
Field
Proxy
Use Outbound Proxy
Outbound Proxy
Use OB Proxy In Dialog
Register
Make Call Without Reg
Register Expires
Ans Call Without Reg
Use DNS SRV
DNS SRV Auto Prefix
Description
SIP proxy server for all outbound requests.
Enable the use of <Outbound Proxy>. If set to no, <Outbound Proxy> and <Use OB Proxy in Dialog) is ignored.
The default is no.
SIP Outbound Proxy Server where all outbound requests are sent as the first hop.
Whether to force SIP requests to be sent to the outbound proxy within a dialog. Ignored if <Use Outbound Proxy> is no or <Outbound Proxy> is empty.
The default is yes.
Enable periodic registration with the <Proxy>. This parameter is ignored if <Proxy> is not specified.
The default is yes.
Allow making outbound calls without successful (dynamic) registration by the unit. If No, dial tone will not play unless registration is successful.
The default is no.
Allow answering inbound calls without successful (dynamic) registration by the unit. If proxy responded to REGISTER with a smaller Expires value, the PAP2T will renew registration based on this smaller value instead of the configured value. If registration failed with an Expires too brief error response, the PAP2T will retry with the value given in the
The default is 30.
Expires value in sec in a REGISTER request. PAP2T will periodically renew registration shortly before the current registration expired. This parameter is ignored if <Register> is no. Range: 0 – (231 – 1) sec
Whether to use DNS SRV lookup for Proxy and Outbound Proxy.
The default is no.
If enabled, the PAP2T will automatically prepend the Proxy or Outbound Proxy name with _sip._udp when performing a DNS SRV lookup on that name.
The default is no.
| Linksys SPA9000 Administrator Guide |
Document Version 3.01 |
