Cisco Systems SPA9000 manual IVR Options, IVR Action IVR Menu Choice Parameters

Chapter 2 Getting Started

Using the Interactive Voice Response Interface

IVR Options

Table 2-2summarizes the options provided by the IVR.

Table 2-2 IVR Options

IVR Action	IVR Menu Choice	Parameter(s)	Notes
Enter IVR Menu	* * * *	None	Ignore SIT or other tones until you hear,
			“Linksys configuration menu. Please
			enter option followed by the pound key or
			hang-up to exit.”
Exit IVR Menu	3948	None
Check DHCP	100	None	IVR announces if DHCP in enabled or
			disabled.
Enable/Disable DHCP	101	Enter 1 to enable	Requires password
		Enter 0 to disable
Check WAN IP Address	110	None	IVR announces the current IP address of
			the WAN port.
Set Static IP Address	111	Enter IP address using	DHCP must be “Disabled,” otherwise you
		numbers on the telephone	hear, “Invalid Option,” if you try to set
		key pad. Use the * (star) key	this value.
		when entering a decimal	Requires password
		point.
Check Network Mask	120	None	IVR announces the current network mask
			of SPA.
Set Network Mask	121	Enter value using numbers on	DHCP must be “Disabled,” otherwise you
		the telephone key pad. Use	hear, “Invalid Option,” if you try to set
		the * (star) key when entering	this value.
		a decimal point.	Requires password
Check Static Gateway IP	130	None	IVR announces the current gateway IP
Address			address of SPA.
Set Static Gateway IP	131	Enter IP address using	DHCP must be “Disable,” otherwise you
Address		numbers on the telephone	hear, “Invalid Option,” if you try to set
		key pad. Use the * (star) key	this value.
		when entering a decimal	Requires password
		point.
Check MAC Address	140	None	IVR announces the MAC address of SPA
			in hex string format.
Check Firmware Version	150	None	IVR announces the version of the
			firmware running on the SPA.
Check Primary DNS	160	None	IVR announces the current setting in the
Server Setting			<Primary DNS> parameter.

	Linksys SPA9000 Administrator Guide
2-10	Document Version 3.01