Cisco Systems SPA9000 manual Included in the request

Chapter 6 SPA9000 Field Reference

SIP Tab

SIP Timer B	INVITE time-out value, which can range from 0 to 64 seconds.
	The default is 32.
SIP Timer F	Non-INVITE time-out value, which can range from 0 to 64 seconds.
	The default is 32.
SIP Timer H	INVITE final response, time-out value, which can range from 0 to 64 seconds.
	The default is 32.
SIP Timer D	ACK hang-around time, which can range from 0 to 64 seconds.
	The default is 32.
SIP Timer J	Non-INVITE response hang-around time, which can range from 0 to 64 seconds.
	The default is 32.
INVITE Expires	INVITE request Expires header value. If you enter 0, the Expires header is not included
	in the request.
	The default is 240. Range: 0–(231–1).
ReINVITE Expires	ReINVITE request Expires header value. If you enter 0, the Expires header is not
	included in the request.
	The default is 30. Range: 0–(231–1).
Reg Min Expires	Minimum registration expiration time allowed from the proxy in the Expires header or as
	a Contact header parameter. If the proxy returns a value less than this setting, the
	minimum value is used.
	The default is 1.
Reg Max Expires	Maximum registration expiration time allowed from the proxy in the Min-Expires header.
	If the value is larger than this setting, the maximum value is used.
	The default is 7200.
Reg Retry Intvl	Interval to wait before the SPA9000 retries registration after failing during the last
	registration.
	The default is 30.
Reg Retry Long Intvl	When registration fails with a SIP response code that does not match<Retry Reg RSC>,
	the SPA9000 waits for the specified length of time before retrying. If this interval is 0, the
	SPA9000 stops trying. This value should be much larger than the Reg Retry Intvl value,
	which should not be 0.
	The default is 1200.
Reg Retry Random Delay	Random delay range (in seconds) to add to <Register Retry Intvl> when retrying
	REGISTER after a failure. This feature was added in Release 5.1.
	The default is 0, which disables this feature.
Reg Retry Long Random Delay	Random delay range (in seconds) to add to <Register Retry Long Intvl> when retrying
	REGSITER after a failure. This feature was added in Release 5.1.
	The default is 0, which disables this feature.

	Linksys SPA9000 Administrator Guide
Document Version 3.01		6-9