Chapter 2 Getting Started
Initial Setup and Configuration
Step 4 Select one of the following types of devices to upgrade:
•SPA941/921
•SPA942/922
•SPA962
•SPA901
•SPA9000
•SPA400 Step 5 Click Next.
Step 6 The system displays Page 2 of the Software Upgrade Wizard (see Figure
Figure 2-14 Software Upgrade Wizard—Page 2
Step 7 Type the IP address of the device you are upgrading and enter the Administrator account password, if this is set.
1.To determine the IP address of a SPA92x or 94x phone, press the Menu button,
2.Scroll down to Network and press the left button (Select).
3.Note the Current IP address, and enter it into Page 2 of the Software Upgrade wizard.
To determine the IP address of a SPA901 phone, pickup the handset, press ****, followed by 110#. Step 8 Click Next on Page 2 of the Software Upgrade wizard.
Figure 2-15 illustrates the Upgrade Prompt that appears.
Figure 2-15 Upgrade Prompt
Step 9 Click OK to confirm the upgrade operation.
| Linksys SPA9000 Administrator Guide |
Document Version 3.01 |
