Cisco Systems SPA9000 manual Regional Tab, Call Progress Tones

Chapter 6 SPA9000 Field Reference

Regional Tab

Regional Tab

This section describes the fields for the following headings on the Regional tab:

•Call Progress Tones, page 6-23

•Distinctive Ring Patterns, page 6-24

•Distinctive Call Waiting Tone Patterns, page 6-26

•Distinctive Ring/CWT Pattern Names, page 6-26

•Ring and Call Waiting Tone Spec, page 6-27

•Control Timer Values (sec), page 6-28

•Vertical Service Activation Codes, page 6-29

•Vertical Service Announcement Codes, page 6-33

•Outbound Call Codec Selection Codes, page 6-33

•Miscellaneous, page 6-35

Call Progress Tones

Field	Description
Dial Tone	Prompts the user to enter a phone number. Reorder Tone is played automatically when
	<Dial Tone> or any of its alternatives times out.
	The default is 350@-19,440@-19;10(*/0/1+2).
Second Dial Tone	Alternative to the Dial Tone when the user dials a three-way call.
	The default is 420@-19,520@-19;10(*/0/1+2).
Outside Dial Tone	Alternative to the Dial Tone. It prompts the user to enter an external phone number, as
	opposed to an internal extension. It is triggered by a, (comma) character encountered in
	the dial plan.
	The default is 420@-19;10(*/0/1).
Prompt Tone	Prompts the user to enter a call forwarding phone number.
	The default is 520@-19,620@-19;10(*/0/1+2).
Busy Tone	Played when a 486 RSC is received for an outbound call.
	The default is 480@-19,620@-19;10(.5/.5/1+2).
Reorder Tone	Played when an outbound call has failed or after the far end hangs up during an established
	call. Reorder Tone is played automatically when <Dial Tone> or any of its alternatives
	times out.
	The default is 480@-19,620@-19;10(.25/.25/1+2).
Off Hook Warning Tone	Played when the caller has not properly placed the handset on the cradle. Off Hook
	Warning Tone is played when Reorder Tone times out.
	The default is 480@10,620@0;10(.125/.125/1+2).

	Linksys SPA9000 Administrator Guide
Document Version 3.01		6-23