Chapter 3 Configuring Voice Service and Voicemail

Completing the Voicemail Configuration

Completing the Voicemail Configuration

This section is required to complete the voicemail configuration regardless of whether you use ITSP voicemail, a third-party voicemail server, or the SPA400 local voicemail option.

Step 1 On Page 6 of the wizard, verify or complete the configuration of each line extension and enable the Mailbox for each extension.

Figure 3-7 Configure the SPA9000 Internal Phone Extensions

Note When you check the mailbox, the extension uses the extension number for the mailbox ID (MBID), which is the correct setting.

Step 2 After completing Page 6, click Next.

The system displays the page shown in Figure 3-8.

 

Linksys SPA9000 Administrator Guide

3-6

Document Version 3.01

Page 72
Image 72
Cisco Systems manual Completing the Voicemail Configuration, Configure the SPA9000 Internal Phone Extensions