Cisco Systems SPA9000 manual Enhancements in Release, Configuring the Streaming Audio Server

Chapter 4 Configuring SPA9000 Features

Enhancements in Release 5.1

Configuring the Streaming Audio Server

The following provides step-by-step procedures for implementing a SAS with an external music source.

Step 1 Connect an RJ-11 adapter between the music source and an FXS port on the SPA9000 (Phone 1 or Phone 2).

Step 2 On the administration web server, click the SIP tab and scroll down to the Streaming Audio Server section (see Figure 4-16).

Figure 4-16 Enabling the Streaming Audio Server

Step 3 On the SAS Enable pull-down selection list, select yes.

Step 4 In the MOH Server field of the Call Feature Settings section, enter the User ID configured for the line attached to the audio source.

Step 5 Click Submit All Changes.

Enhancements in Release 5.1

This section describes feature enhancements introduced in Release 5.1 of the SPA9000. It includes the following topics:

•Bridge Mode, page 4-32

•REGISTER Enhancement, page 4-33

•Renew DHCP On SIP Request Timeout, page 4-34

In addition, Release 5.1 introduces downloadable prompts for the Auto-Attendant, a feature that is useful for localization of the SPA9000. For more information about this feature, see the “Downloading Prompts” section on page 5-8.

Bridge Mode

In Release 5.1, the <CWFD Bridge Mode> and the <XFER Bridge Mode> parameters were added to improve the way that the SPA9000 handles call forwarding and call transfer. This section describes the added functionality provided and includes the following topics:

•Call Forward Bridge Mode, page 4-33

•Call Transfer Bridge Mode, page 4-33

	Linksys SPA9000 Administrator Guide
4-32	Document Version 3.01