Cisco Systems manual SPA9000 Field Reference

		Chapter 6 SPA9000 Field Reference
	FXS 1/2 Tab
SIP Debug Option		SIP messages are received at or sent from the proxy listen port. This feature controls
		which SIP messages to log. The choices are as follows:
		• none—No logging.
		• 1-line—Logs the start-line only for all messages.
		• 1-line excl. OPT—Logs the start-line only for all messages except OPTIONS
		requests/responses.
		• 1-line excl. NTFY—Logs the start-line only for all messages except NOTIFY
		requests/responses.
		• 1-line excl. REG—Logs the start-line only for all messages except REGISTER
		requests/responses.
		• 1-line excl. OPTNTFYREG—Logs the start-line only for all messages except
		OPTIONS, NOTIFY, and REGISTER
		requests/responses.
		• full—Logs all SIP messages in full text.
		• full excl. OPT—Logs all SIP messages in full text except OPTIONS
		requests/responses.
		• full excl. NTFY—Logs all SIP messages in full text except NOTIFY
		requests/responses.
		• full excl. REG—Logs all SIP messages in full text except REGISTER
		requests/responses.
		• full excl. OPTNTFYREG—Logs all SIP messages in full text except for OPTIONS,
		NOTIFY, and REGISTER requests/responses.
		The default is none.
RTP Log Intvl		Periodically, the SPA9000 logs RTP statistics via syslog, depending on debug level. Enter
		the period of time in seconds.
		The default is 0.
Restrict Source IP		If Lines 1 and 2 use the same SIP Port value and the Restrict Source IP feature is enabled,
		the proxy IP address for Lines 1 and 2 is treated as an acceptable IP address for both lines.
		To enable the Restrict Source IP feature, select yes. Otherwise, select no.
		The default is no.
Referor Bye Delay		Controls when the SPA9000 sends BYE to terminate stale call legs after completion of
		call transfers. Multiple delay settings (Referor, Refer Target, Referee, and Refer-To
		Target) are configured on this screen. For the Referor Bye Delay, enter the appropriate
		period of time in seconds.
		The default is 4.
Refer Target Bye Delay		For the Refer Target Bye Delay, enter the appropriate period of time in seconds.
		The default is 0.
Referee Bye Delay		For the Referee Bye Delay, enter the appropriate period of time in seconds.
		The default is 0.

	Linksys SPA9000 Administrator Guide
6-40	Document Version 3.01