Cisco Systems SPA9000 manual Non-Default

Chapter 2 Getting Started

Using the Interactive Voice Response Interface

Table 2-2 IVR Options (continued)

Set Primary DNS Server	161	Enter IP address using	Requires password
		numbers on the telephone
		key pad. Use the * (star) key
		when entering a decimal
		point.
Check administration web	170	None	IVR announces the port that the web
server port			server is listening on. (Default is 80)
Check LAN IP Address	210	None	IVR announces the current IP address of
			the LAN port.
Check PBX multicast	180	None	IVR announces the current value.
address
Set PBX multicast	181	Enter IP address and port.	Enter a * between the IP address and the
address		Use * key for entering a dot.	Port fields. Requires Password
		For example,
		224.168.168.169:8089 is
		224*168*168*169*8089.
Enable/Disable	7932	Enter 1 to enable	Requires password
administration web server		Enter 0 to disable
Manual Reboot of Unit	732668	None	After you hear “Option Successful,” hang
			up. Unit reboots automatically.
User Factory Reset of	877778	Enter 1 to confirm	SPA prompts for confirmation. After
Unit		Enter *(star) to cancel	confirming, you hear “Option
WARNING:		operation	Successful.” Hang up. Unit reboots and
			all “User Changeable” configuration
ALL “User-Changeable”
			parameters are reset to factory default
NON-DEFAULT
			values.
SETTINGS WILL BE
LOST!
This might include
network and service
provider data.
Factory Reset of Unit	73738	Enter 1 to confirm	SPA prompts for confirmation. After
WARNING:		Enter * (star) to cancel	confirming, you hear “Option
		operation	Successful.” Hang up. Unit reboots and
ALL NON-DEFAULT
			all configuration parameters are reset to
SETTINGS WILL BE
			factory default values.
LOST!
This includes network and
service provider data.

Note The items marked with “Requires Password” only require a password if the Administrator password is set.

	Linksys SPA9000 Administrator Guide
Document Version 3.01		2-11