Cisco Systems manual SPA9000 Field Reference

			Chapter 6 SPA9000 Field Reference
	Regional Tab
FXS Port Input Gain			Input gain in dB, up to three decimal places. The range is 6.000 to -12.000.
			The default is -3.
FXS Port Output Gain			Output gain in dB, up to three decimal places. The range is 6.000 to -12.000. The Call
			Progress Tones and DTMF playback level are not affected by the <FXS Port Output
			Gain>.
			The default is -3.
DTMF Playback Level			Local DTMF playback level in dBm, up to one decimal place.
			The default is -16.0.
DTMF Playback Length			Local DTMF playback duration in milliseconds.
			The default is .1.
Detect ABCD			To enable local detection of DTMF ABCD, select yes. Otherwise, select no.
			The default is yes. Setting has no effect if DTMF Tx Method is INFO; ABCD is always
			sent OOB regardless in this setting.
Playback ABCD			To enable local playback of OOB DTMF ABCD, select yes. Otherwise, select no.
			The default is yes.
Caller ID Method			The following choices are available:
			• Bellcore (N.Amer,China)—CID, CIDCW, and VMWI. FSK sent after first ring (same
			as ETSI FSK sent after first ring) (no polarity reversal or DTAS).
			• DTMF (Finland, Sweden)—CID only. DTMF sent after polarity reversal (and no
			DTAS) and before first ring.
			• DTMF (Denmark)—CID only. DTMF sent after polarity reversal (and no DTAS) and
			before first ring.
			• ETSI DTMF—CID only. DTMF sent after DTAS (and no polarity reversal) and
			before first ring.
			• ETSI DTMF With PR—CID only. DTMF sent after polarity reversal and DTAS and
			before first ring.
			• ETSI DTMF After Ring—CID only. DTMF sent after first ring (no polarity reversal
			or DTAS).
			• ETSI FSK—CID, CIDCW, and VMWI. FSK sent after DTAS (but no polarity
			reversal) and before first ring. Waits for ACK from CPE after DTAS for CIDCW.
			• ETSI FSK With PR (UK)—CID, CIDCW, and VMWI. FSK is sent after polarity
			reversal and DTAS and before first ring. Waits for ACK from CPE after DTAS for
			CIDCW. Polarity reversal is applied only if equipment is on hook.
			The default is Bellcore(N.Amer, China).
Caller ID FSK Standard			The SPA9000 supports bell 202 and v.23 standards for caller ID generation. Select the FSK
			standard you want to use, bell 202 or v.23.
			The default is bell 202.
Feature Invocation Method			Select the method you want to use, Default or Sweden default. (Not in PAP2T)
			The default is Default.
		Linksys SPA9000 Administrator Guide
6-36			Document Version 3.01