Chapter 3 Configuring Voice Service and Voicemail
Using the Wizard to Configure ITSP Voice Services and Voicemail
Note Contact the ITSP/VMSP for the correct configuration parameters if a URL is not used for the voicemail server link.
If you selected Option 2 for Step 7 (see Figure 3-4), the system displays the version of Page 5 shown in Figure 3-6.
Figure 3-6 Configuring a Third-Party Voicemail Server
Complete the fields on Page 5 as directed by the ITSP.
The following describes the purpose of each parameter on both versions of Page 5.
•Voicemail Proxy—Enter the fully qualified domain name of a SIP outbound proxy server where all outbound requests are sent as the first hop. This modifies the <Outbound Proxy> parameter.
•Outbound Proxy—Enter the fully qualified domain name of a SIP outbound proxy server where all outbound requests are sent as the first hop.
•Mailbox Subscribe URL—URL that should receive the SUBSCRIBE messages, so the SPA9000 receives voicemail status notification for all mailboxes on this line. This parameter allows $USER and $PROXY macros, such as $USER@$PROXY.
•Mailbox Deposit URL—URL that the SPA9000 contacts when clients and external callers need to deposit voicemail in any of the mailboxes on this line.
•Mailbox Manage URL—URL that the IP telephony contacts when it needs to check voicemail for any of the mailboxes on this line.
•UserID—Enter the value provided by your ITSP.
•Password—Enter the value provided by your ITSP.
•Display Name—Enter the value provided by your ITSP.
•Auth ID—Enter the SIP authentication ID if this is required by your ITSP.
Step 9 After completing Page 5, click Next.
The system displays the page shown in Figure 3-7 on page 3-6.
| | Linksys SPA9000 Administrator Guide | | |
| | |
| Document Version 3.01 | | | 3-5 | |
| | | |
