Chapter 2 Getting Started
Initial Setup and Configuration
Figure 2-10 SPA Setup Wizard—Page 9
Step 7 Type the IP address of the SPA9000 on the Internet.
To determine the Internet IP address of the SPA9000:
1.Pickup the handset of an analog phone connected to the Phone 1 port of the SPA9000.
2.Press ****.
3.Press 110# and note the address.
Step 8 Type the Administrator account password on Page 9 if this has been supplied to you. Otherwise, leave this field blank.
Step 9 Click Next.
The system displays Page 10 of the Setup Wizard, which is the last page required to establish basic connectivity for the system (see Figure
Figure 2-11 SPA Setup Wizard—Page 10
| Step 10 | Select the connection type (DHCP or Static IP) from the | |||
| Step 11 | If you are using Static IP, type the IP addresses of the primary and secondary DNS servers. | |||
|
| Linksys SPA9000 Administrator Guide |
|
| |
|
|
| |||
| Document Version 3.01 |
|
|
| |
|
|
|
| ||
