Cisco Systems SPA9000 manual Ring and Call Waiting Tone Spec

Chapter 6 SPA9000 Field Reference

	Regional Tab
Ring5 Name	Name in an INVITE’s Alert-Info Header to pick distinctive ring/CWT 5 for the inbound
	call.
	The default is Bellcore-r5.
Ring6 Name	Name in an INVITE’s Alert-Info Header to pick distinctive ring/CWT 6 for the inbound
	call.
	The default is Bellcore-r6.
Ring7 Name	Name in an INVITE’s Alert-Info Header to pick distinctive ring/CWT 7 for the inbound
	call.
	The default is Bellcore-r7.
Ring8 Name	Name in an INVITE’s Alert-Info Header to pick distinctive ring/CWT 8 for the inbound
	call.
	The default is Bellcore-r8.

Ring and Call Waiting Tone Spec

Field	Description
Ring Waveform	Waveform for the ringing signal.
	The default is Sinusoid.
Ring Frequency	Frequency of the ringing signal. Valid values are 10–100 (Hz).
	The default is 25.
Ring Voltage	Ringing voltage. 60–90 (V).
	The default is 70.
CWT Frequency	Frequency script of the call waiting tone. All distinctive CWTs are based on this tone.
	The default is 440@-10.

	Linksys SPA9000 Administrator Guide
Document Version 3.01		6-27