Cisco Systems WRT54G2 Administration Factory Defaults, Administration Upgrade Firmware, Chapter

Chapter 3

Advanced Configuration

Ping Test

Traceroute Test

Traceroute  To test the performance of a connection, click Traceroute to open the Traceroute Test screen. Enter the address of the PC whose connection you wish to test and click Traceroute. The Traceroute Test screen will show if the test was successful. To stop the test, click Stop. Click Clear Log to clear the screen. Click Close to return to the Diagnostics screen.

Traceroute Test

Administration > Factory Defaults

The Administration > Factory Defaults screen allows you to restore the Router’s configuration to its factory default settings.

Factory Defaults

Restore Factory Defaults  To reset the Router’s settings to the default values, select Yes, and then click Save Settings. Any settings you have saved will be lost when the default settings are restored.

Administration > Factory Defaults

Wireless-G Broadband Router

Administration > Upgrade Firmware

The Administration > Upgrade Firmware screen allows you to upgrade the Router’s firmware. Do not upgrade the firmware unless you are experiencing problems with the Router or the new firmware has a feature you want to use.

Administration > Upgrade Firmware

Before upgrading the firmware, download the Router’s firmware upgrade file from the Linksys website, www.linksysbycisco.com.

Upgrade Firmware

Please select a file to upgrade  Click Browse and select the firmware upgrade file. Then click Upgrade and follow the on-screen instructions.

Administration > Config Management

This screen is used to back up or restore the Router’s configuration file.

Administration > Config Management

Backup Configuration

To back up the Router’s configuration file, click Backup. Then follow the on-screen instructions.

21