Overview of Types of Resets: Restore Factory Defaults: TEST Button

32.3. Restore Factory Defaults: TEST Button

General Information

You can do two types of resets. The difference between them depends on how long you hold the Test Button before letting go.

Use a pointed object to press the Test Button in. We recom- mend having the print server attached to a printer when you do a reset. It is easier to work with, and the operation will print a confirmation page which can be quite useful.

Intermate100

If you are not good at counting seconds, you should make sure you can see a watch or clock that shows seconds.

aTurn the unit off by pulling the power supply jack out of the print server.

bPress the TEST Button.

cPut the jack back in while you keep holding the Button for:

number of seconds:

Result

 

 

less than 15 sec.

Reset IP address to 0.0.0.0, subnet mask to 255.255.255.0

 

and default gateway to 0.0.0.0

 

 

more than 30 sec.

Restore All Defaults.

 

This is just like the remote “Restore All Defaults”.

 

 

dWhen you let go of the Button, a confirmation page will be printed if the reset has been successful.

eReboot. A hardware reboot is easiest— use the power supply jack to power the print server Off and then On.

Intermate100 and Intermate101 Print Server Administration Manual

223

Page 223
Image 223
Intermate manual Restore Factory Defaults Test Button, Intermate100, General Information, Result