Intermate 100 manual

Configuration Checklists: Checklist for Each Service or Host Session

4If the output is to be directed to one of the configurable logical printers, check the configuration page [Logical Printers 1-8] and make sure that the definition of your chosen logical printer does what you want it to:

•Does it point to the target printer (Local Printer, single Network Printer / Network Destination or Load Balancing Pool) you want to be used for printing this kind of job?

•If the target is a load balancing pool, are the printers compatible with each other and are they listed in an appropriate order?

•Are “string before” and/or “string after” (if any) correctly defined?

•Are substitution string(s) (if any) correctly listed?

And have they been properly entered in the [String Substitutions] configuration page?

5Check to be sure the target printer is configured properly

•If the target printer chosen is a network printer / network destination, then find this printer under “Output Control” > [Network Printers (NDO)] / [Network Destination Option]. Check to see that the IP address (or name) is ok, that the marked print method (Raw Socket or LPR) works on the printer, and that the necessary information for the chosen print method is properly entered.

•If the chosen target is a load balancing pool, then check to see that all of the printers in the pool are configured properly.

•After rebooting, choose “Status” > [Target Printer Info] to do a last check.

Intermate100 and Intermate101 Print Server Administration Manual 244