[Logical Printers 1-8]: Introduction

20. [Logical Printers 1-8]

20.1. Introduction

All eight configurable logical printers are set up on a single configuration page in the HTTP interface. Each set of parame- ters is labelled “Logical Printer #” and lines are used to sepa- rate the sets from each other.

For each configurable logical printer PR1 - PR8 there are five fields: one mandatory, one conditionally mandatory, and three optional fields.

Target Printer (1-2 mandatory fields)

You must choose a target printer from the drop-down list for that field.

If you use the NDO and choose “pool” instead of a single tar- get, you must also define the pool in the field following. Printers in a pool must all function identically (as described in““Load Balancing Pools” (NDO only)” [page 132]).

Up to 3 optional fields for data manipulation

String Before

String After

String Substitutions

Order of fields within each set

On the configuration page, the optional fields appear first in the set of parameters defining a logical printer, while the target printer definition comes last.

Intermate100 and Intermate101 Print Server Administration Manual

151

Page 151
Image 151
Intermate 100 manual Logical Printers, Target Printer 1-2 mandatory fields, Up to 3 optional fields for data manipulation