Processing Facilities: Logical Printers

17.6. Logical Printers

17.6.1. PR0 / Logical Printer 0

Logical printer zero (PR0) has three special properties:

It has no data-manipulation capacity. That is, it can not do any pre- or post-job processing and cannot handle substitution strings.

It is always the default setting for where a given service will send jobs.

It always prints to the system target printer. It is only by changing the definition of the system target printer (page 108) that you can change the final destination of jobs that go through PR0 / Logical Printer 0.

17.6.2.The Configurable Logical Printers 1-8

You can configure 8 different logical printers, known on older print servers as PR1 to and including PR8, and on newer print servers as Logical Printer 1 to and including Logical Printer 8. Following are the parameters you can set for each logical printer you want to use.

Physical printer

Each definition of a logical printer must include information on the physical printer it will carry the job to. This will be either a target printer or a pool. Several logical printers can point to the same target printer or to the same pool.

In addition you can choose one or more types of data manipu- lation (“pass-processing”) as described below:

a)Pre- and Post-Job Processing (“String Before and String After”)

Pre- and post-job processing (“string before” and “string after”) enable intelligent selection of advanced finishing options from applications that do not natively support these features.

This kind of processing is especially useful in connection with digital copiers and other types of “Multi-Function Devices” with

Intermate100 and Intermate101 Print Server Administration Manual

125

Page 125
Image 125
Intermate 100 manual 17.6.1. PR0 / Logical Printer, Configurable Logical Printers, Physical printer