Intermate 100 manual Menu Items and Settings, Main Menu, Configuration Menus

Configuration Using a Telnet Client: Menu Items and Settings

10.2. Menu Items and Settings

“Main Menu”

For the most part, each item corresponds to a configuration page in the HTTP interface. For example:

1.General

2.Network.

...

The list ends with a display of the syntax for two kinds of save (S and C) and for exiting the Telnet session (Q). There is a tim- eout function that breaks the connection to the Intermate1xx after about a minute of inactivity.

As indicated above, each item is numbered.

Select an item by typing the number of the item to the prompt > and pressing the <Enter> key.

Configuration Menus

When you have chosen an item on the main menu, you will be presented with a sub-menu with a heading, a numbered list of parameters and the message “R. Return to main menu”.

Examples of parameters in the sub-menu called “Raw Socket Menu”:

1.TCP Port 1 <9100>

2.Use Logical Printer 1 <PR0>

3.TCP Port 2 <9100>

4.Use Logical Printer 2 <PR4>

...

As you can see in the example above, each parameter line fin- ishes by showing the current setting in angled brackets.

Select the parameter you want to change by typing in the num- ber and pressing the <Enter> key.

You will then be shown the name of the parameter, the current setting, and information on possible values which are either chosen by item numbers or typed in. Pressing the <Enter> key finishes your data entry and returns you to the sub-menu (“pre- vious menu”).

Intermate100 and Intermate101 Print Server Administration Manual 76