Intermate 100 manual Appendix G. Configuration Checklists, Overall Checklist

Configuration Checklists: Overall Checklist

Appendix G. Configuration Checklists

G.1. Overall Checklist

1Establish contact.

Assign IP address, subnet mask, default gateway.

2Login. The default password is admin and the password is admin.

3Configure the remaining parameters in [TCP/IP] configuration:

•Host name is mandatory. Check the syntax guidelines.

•DNS server is where the Intermate1xx does look-ups if you enter names instead of IP addresses for various servers and hosts in other configurations.

•Registering a WINS server makes your Intermate1xx known to an NT environment.

4Configure the [General] settings and [Network] settings. If you use the NDO in a stand-alone setup (i.e. you do not want to use a local printer), be sure to change the System Target Printer from “local” to a network destination.

5Change the password.

6Enter your license key if you have purchased one or more of the available options: Network Destination Option (NDO - included standard in G-32 based products); Host Print Option (SCS TNe and/or IPDS).If your point-of-purchase has already installed a Software Key, it will be written on the label on the back of the unit.

If you get a key yourself, we recommend that you write it on the label.

7Configure one or more target printers (physical printers):

•Configure the local printer; this is the printer to which the Intermate1xx is directly attached.

Intermate100 and Intermate101 Print Server Administration Manual 241