Intermate 100 manual Other Configurations

Introduction: Topics in This Manual

Socket by defining different TCP ports, and you can define up to eight LPR queues. So in all, you can configure 15 services on these five configuration pages.

You must, of course, also establish printer definitions which can use these services. How to do this is covered in all relevant chapters explaining the supported printing environments.

•“TN5250E Option” Sub-Group is covered in the Printing Environment Guide for IBM OS/400 Systems.

•“TN3270E Option” Sub-Group is covered in the Printing Environment Guide for IBM Mainframe Hosts.

•“IPDS Option” Sub-Groupis covered fully in each of the separate IBM Printing Environment Guides.

Note that printer definitions for IPDS under OS/2 and AIX are covered in this manual; use the guide for IBM Mainframe Hosts to configure IPDS in the print server.

•“Novell Netware” Sub-Group, for support of IPX/SPX-based printing in NDS and Bindery modes, is covered in a Printing Environment Guide published in December 2001. This feature is only available on Intermate100s sold before 4 January 2002, up to and including code level G22_1491.

1.4.6.“Other Configurations”

The sub-group “Other Configurations” is found in the Intermate101-JScribemodel (G34). Consult CCP’s manual for information on these possibilities.

Note that JScribe must always be run through the logical printer layer.

Intermate100 and Intermate101 Print Server Administration Manual 18