Intermate 100 manual Put C\PrintServerUpdates\G222021.FFS

Using FTP Directly: Upgrades of Firmware and Fonts (FFS files)

The file name in the <source> part of the command must match the case of the file name on your PC.

The file must have the same name when it is “put” on the target, so prevent typographical errors by not specifying a name for the <target>.

Example:

put C:\PrintServerUpdates\G22_2021.FFS

8Wait for the file transfer to complete. During file transfer, the Error LED (green) will flash; when the transfer is complete, it will turn off.

9If you have more upgrading to do, repeat steps 5 - 8.

Important:

Before attempting to move to a new directory, you must first go up to the root again

cd ..

10If you want to activate the settings from the HTTP menu, close the FTP session

bye

Otherwise, activate the new settings from within the FTP session.

cd ..

cd \reboot get immediate get controlled

Move one directory level up Change to the "reboot" directory Perform an immediate reboot or perform a controlled reboot

The FTP session is automatically terminated.

Rebooting will take longer than usual because the flash mem- ory is being programmed. While this is happening, both LEDs are lit.The print server should then return to “Ready” in the nor- mal operation mode: the green LED (Error) on and the red LED (Line) off.

Intermate100 and Intermate101 Print Server Administration Manual 207