Services in “Input Control”: Raw Socket (= “Port 9100" = Reverse Telnet)

Example: TCP Port # 4 set to 49100

This example assumes that the print is to be directed to a logi- cal printer (here called number 1) which performs pre-process- ing, post-processing, and/or string substitution. The logical printer definition also determines the choice of target printer.

Special ISPP port

Use the new [ISPP Port] page to change the port number for this dedicated port from the default setting (9111), and/or to specify “Output to”. Remember to “Save & Cont.” and then “Reboot” to activate. Consider this port as an addition or an alternative to using the usual raw socket port(s) to encrypt print from an IBM mainframe host (running VPS/Secure from LRS).

Raw Socket Configuration Tip: Ensuring Bidirectional Communication

If you want to exploit the potential for bidirectional communica- tion, you need to check a page in the “Configurations > Output Control” Section; the choice of pages depends on the choice of Target Printer—local or network.

If you intend to print to the local printer (where the print server is attached):

Choose [Local Printer Parallel Port] in the “Configurations > Output Control” section.

The parameter “Parallel Port IEEE P1284 Negotiation Mode” should be set to “ECP” or “Nibble”. If you choose “Auto” and the result falls back to “Compatible”, you will not get bidirectional communication.

Make sure that the parameter “PJL Support” is activated with the “Yes” radio button.

If you intend to print to a Network Destination, check the con- figuration of the physical printer (Target Printer) on the [Net- work Destination Option (NDO)] page. This printer must use Raw as the transportation protocol. Note that the choice of port number here has nothing to do with the print server port num- ber value in step 1.

Intermate100 and Intermate101 Print Server Administration Manual

162

Page 162
Image 162
Intermate 100 manual Example TCP Port # 4 set to, Special Ispp port