Intermate 100 manual Configuration file

Using the IMCU for Maintenance: Single Print Server

Configuration file

If you choose to select a file on your local computer, you must first have retrieved it from the source; see “To retrieve” [page 209] in the chapter on upgrading directly with FTP.

Finish each file selection with “Next > “.

11Repeat the process of selection for each type of file you have checked.

12The final “Next>” in connection with file selection will bring you to a dialog in which you must specify the user name and password for the server in question.

13You will then be asked whether or not you want the IMCU to reboot your Intermate1xx after the upgrade.

If you are absolutely sure that there are no current print jobs which can be ruined by an “immediate reboot”, it is safe to answer yes.

If not, you must remember to do a “controlled reboot” afterwards, directly from the print server.

14When you click “Next>” again, the updating will start.

15The process is usually very fast, but if you get impatient, be careful not to switch off the print server, or shut down the IMCU server (by closing the browser) during the upgrade.

Intermate100 and Intermate101 Print Server Administration Manual 215