About the Page Counters, Target Name Local Target | Intermate 100

Standard Monitoring Information: “Status > Target Printer Info”

About the Page Counters

Job Boundary Page Counter shows the number of pages in the job. Total Page Counter shows the total number of pages printed by the printer provided that this information can be read. If not, the number of pages are those printed since the last time the print server was rebooted or powered On; this was always the case for releases older than level 1391.

About Network Target Printers

The information on status for a network printer / network desti- nation is only available and reliable if the printer at this network destination supports SNMP-based queries (see “Recom- mended Features for Network Target Printers” [page 144]).

The effect of Local Printer Negotiation Modes

In the example above, the local printer negotiates in ECP mode and PJL is enabled. Nibble plus PJL will give the same complete information.

Compatible Mode—with or without PJL—will give only limited information, such as the following:

Target Name: Local Target

Communication Protocol: Parallel Port (Compatible mode)

Printer Name: [Unavailable]

Bidirectional Support: No

Printer Status: READY

Display Message: [Unavailable]

Online Status: Online

Job Boundary Page Counter: 0

Total Page Counter: 0

Duplex Print: Not available

Job Queue: No Job in Queue

You can use “Parallel Port IEEE P1284 Negotiation Mode”

[page 137]) to define how PE (Paper Empty or Paper Error con- ditions) and how general printer errors are to be reported.

Nibble mode without PJL and ECP mode without PJL will result in no useful status information being generated.

Intermate100 and Intermate101 Print Server Administration Manual

175

Image 175

Intermate 100 manual About the Page Counters, About Network Target Printers, Effect of Local Printer Negotiation Modes

Contents

Intermate100 / Intermate101 Trademarks Disclaimer Introduction Print Servers, Component Codes and Release Levels IntroductionTarget Audience and Products Target Audience January 2002 IPX/SPX removed Summary overview of major changes SpringAugust 2001 IPP October 2001 ThinPrint December Introduction Target Audience and Products Types of Documentation Print Server Administration ManualManual and Guides Other Types of Documentation Conventions Used in the Manual and Guides Purpose of the About informa- tion Topics in This Manual About the Supported Printing Environments About the FTP Print protocol About Tools for Management and ConfigurationDescriptive Framework Connected Powerful Multi Purpose UtilityAbout Initial Contact Getting Basic sub-group has three configuration pages About Configuring the Basic and Permission Sub- Groups Target printer About Configuring Services and Host-SessionsKey Concepts Input control and HPOs Output Control Configuration Pages for Output and InputLogical printer Processing Facilities Input Control Sub-Group Input Five Sub-Groups Other Configurations About Information and Monitoring Possibilities Chapters on upgrades and maintenance About Upgrades and MaintenanceMaintenance-related items on the Http menu About the Appendices Printing Environments Windows 2000 and Windows XP What is a printerIntroduction Raw Socket Printing Standard TCP/IP Port Page Page Native LPR LPRIntermate Print Port Print queue nameip address Windows 2000 and Windows XP LPR Http//192.168.0.227631/printer Internet Print Protocol Windows 2000 and Windows XP Internet Print Protocol Windows NT Install the Print Port Program Using an Intermate Print Port for Raw Socket orDefine Printer and Port Page Setting up a Raw Socket Port Port Print queue nameip address Page Prerequisite Native LPR Windows NT 4.0 Native LPR \systemroot\SYSTEM32\DRIVERS\ETC Windows NT 4.0 Native LPR Add the Intermate Port 9100 or LPR printer port Windows 95/98 Install the Print Port Program New Printer Windows 95/98 New Printer Add the Intermate Port 9100 or LPR printer port Setting up a Raw Socket Port Port Print queue nameip address Page Novell Netware LPR via pure IP Apple LaserWriter LPR only Mac OS 8.1 and higher To set up for printing Viewer.html?docid=0900253d80006cfa&docheader=ter- minal Mac OS 7.5 or Earlier Topics Covered AIX Initialization Screen LPR AsciiField Comments FTP How to Print LPD Create a new Ipds printer definition Ipds with PSF/6000 Checking and Using the Ipds Connection General Printing Problems for AIX Ipds OS/2 2.x and OS/2 Warp Create a new printer and queue LPR Ascii data, e.g. PCL and Postscript Para Print from WIN-OS/2 using the Lprmon command Print using LPR command from the Command LineElement Replace with To obtain status from the TCP/IP LPD connected printer Troubleshooting System requirements Ipds from PSF/2 OS/2 2.x and OS/2 Warp Ipds from PSF/2 Tools for Management Configuration Prerequisites Http Browser Http//192.168.0.227 How To Connect Actions Menu Items and Groups Before Login Tip Login with User Name and Password Menu Items and Groups After Login At the bottom of each configuration page are three buttons How to Change Settings on Configuration Pages Activating New Values By Rebooting Log out from the Intermate1xx by closing the browser window Logout Platform Prerequisites Configuration Using a Telnet ClientConnecting Setting Up Telnet Terminal Preferences Configuration Menus Menu Items and SettingsMain Menu Commands below, interface means Intermate1xx print server What the Imcuimcu is and how It works Intermate Management and Configuration Utility Imcu This Chapter Covers Installation and Basic Use Installation of the Various Elements Establishing an Imcu Server Log How to Log In and Out Sample device list is shown on the next Device List / Available Agents Device List Remote Installation of an Agent from the Imcu server Installing Agents Troubleshooting Agent Installation on a PC Direct Installation of an Agent on a PCEmbedded Agent on the Intermate1xx Initial Contact IP Assignments for Initial Contact Host Name Information Needed Before Starting How to find the group of settings called TCP/IP Ipconfig Windows NT 4.0, Windows 2000 or XP Method Overview IP Assignments for Initial Contact Method Overview Etc/bootptab file Assignment Using Bootp IP Assignments for Initial Contact Assignment Using Bootp 192.168.0.227 00c0a200801e Assignment Using Rarp IP Assignments for Initial Contact Assignment Using Rarp Assignment Using Dhcp Arp -s 192.168.0.227 00-c0-a2-00-80-1e Static IP Assignment Using ARP and PingPage Prerequisites Static IP Assignment Using the ImcuSteps Page Configuring Basic Permissions SUB-GROUPS TCP/IP Host Name Syntax for IP Address, Subnet Mask, and Default GatewayEnable DHCP, BOOTP, RARP-or none of these Mandatory IP-identifying information DNS Server for Look-Ups Optional SettingsWins Server Introduction to the Chapter General Device’s location Administrative ParametersSysAdmin contact Model System Target Printer has the following special functions System Target Printer Values Comments Enable Front Panel Messages PJL Media speed and duplex Network Enable Local MAC Address 7F.FF.FF.FF.FF.FF Local MAC Address Re-enter Password Configuring PermissionsPassword Change Enter New Password Ordering a key License Key About the Global MAC Address License Key Entry Configuring Print Services and Host Sessions Processing Facilities Services TCP/IP Sessions, Services and Host-Sessions HPO SCS TN5250E Host Sessions HPO SCS TN3270E Host Session HPO Ipds Host Session System Target Printer Network Printers Using NDOPhysical Printers = Target Printers Local Printer Processing layers. Read from left to right Processing Layers Old Use Logical Use Logical Printer/Output ToPrinter Physical printer Configurable Logical PrintersLogical Printers 17.6.1. PR0 / Logical Printer How Strings Are Written String Substitution Examples of Logical Printer Definitions Data Manipulation in the Logical Printer Layer Substitution Logical Pre-Processing String BeforePrinter Strings PR0 Processing Flows-Examples SCS TN3270 through PR0 Logical Printer PR5 configured for string before and string after Load Balancing Pools NDO only Printer Pool Strings Working with NDO Load Balancing Pools and Data ManipulationLogical Pre-Processing Post-Processing LPR-4 Types Logical Load Pre-Processing Post-Processing Is the result bi Supports 1284 Directional Be enabled?Local Printer Parallel Port Introduction-Messages and Status Reporting See About Error Reporting in ECP Mode Value Comments Parallel Port Ieee P1284 Negotiation ModeValues for print servers using releases 2111 and higher Values for print servers using releases older than Value Ieee Timing Log for ECP and Nibble Modes PJL Support Report Compatible Mode PE as Compatible Mode, Report Problems AsReport Compatible Mode Error as Value for Comments Special PJL Settings for ECP and NibbleCheck for Pending Printer Data When Idle For / Reverse Data PJL Printer Status Feedback Frequency ECP Mode on a printer that understands PJL About Error Reporting in ECP ModeECP Mode on a printer that does not understand PJL Disable this if you are using NDO Enable Power Detection Brushed-up Functionality and Terminology Recommended Features for Network Target PrintersNetwork Destination Option Requirements Configurations for Each Network Destination # Hostname Mandatory LPR Print Method Mandatory Raw Socket port numbers Raw Socket TCP Port Printer LPR Queue Name LPR settingsLPR Count Byte MB Local Printer-Do Not Enable Power Detection Changes Needed on Other Configuration PagesSystem Target Printer in a Stand-Alone Setup Order of fields within each set Logical PrintersTarget Printer 1-2 mandatory fields Up to 3 optional fields for data manipulation Target Printer Determining the order of values to enter Load Balancing Pool Example Comments 3,2 500 100 200 String Before and String After String Substitutions Input String # and Output String# Substitution Strings Planning More informa- tion Services in Input ControlCommon Feature How to Direct Output Advanced Settings Raw Socket = Port 9100 = Reverse Telnet Example TCP Port # 1 set to Special Ispp port Example TCP Port # 4 set to Name LPR Print Queues LPD ProtocolQueue Name Queue Type Output is directed to Using FTP Print ConfigurationFTP Print IPP Print Internet Printing Protocol Included FeaturesPrint server configuration Printer configuration and use ThinPrint ThinPrint configuration page in the Intermate1xxIntroduction Services in Input Control ThinPrint Intermate1xx Value Where the output is sent by the print server Management Information Monitoring Possibilities Main Status Pages Other Printouts in the Actions Group Help Quick Guide Status Group on the Http Menu Standard Monitoring Information Target Name Local Printer Status Target Printer InfoTarget Name Network Destination Target Name Local Target About the Page CountersAbout Network Target Printers Effect of Local Printer Negotiation Modes Status System Log Messages about things you can fix yourself Messages requiring you to seek help from a point of purchase Imcu Agent Configurable Monitoring Tools Mail Notification Parameter Default Comments Setting Introduction and Pre-Requisites Configure Snmp To set up a connection Set Up a Connection With Your Snmp Tool Configure Snmp Set Up a Connection With Your Snmp Tool Configure Snmp Set Up a Connection With Your Snmp Tool To define a query and edit variables Edit Variables To add the Private MIB Load and Edit Options Parameters To edit the Intermate1xx parameters Tip Traps To set up trapsParameter 6.1.4.1.1527 00000000400c0a20507f8 Reboot the Intermate1xx Look up the number in . Snmp Printer Trap Numbers Using and Viewing Traps Configure Snmp Using and Viewing Traps Purposes and Limitations Printer and Job Status via Finger External Tool Finger @192.168.0.227 How to Use It Upgrades and Maintenance What and How Upgrade ComponentsHow to Get Upgrades How to See Which Firmware is Currently Loaded Two Part Version-Naming System What the Firmware File Names MeanRelease Level Designations Overview of Component Types and File Names File Name FSS-Files Configuration file imacfg.bin Configuration Files 28.4.2. .IDB Intermate100 G22 Print Server’s FTP Directory and Its Libraries Intermate101 G32 and G34 Dir How to Inspect the FTP Directory Upgrades of Firmware and Fonts FFS files Using FTP Directly Put C\PrintServerUpdates\G222021.FFS Upgrades of IDBs Imacfg.bin Binary Configuration File imaconfig.bin Put C\PrintServerConfigs\imacfg.bin Advantages Using the Imcu for Maintenance Single Print Server About file types FFS files, such as Main Code Configuration file Using the Imcu for Maintenance Single Print Server Bulk Upgrade Using the Imcu for Maintenance Bulk Upgrade Cable Upgrade of Main Code or Boot Code Using a Serial Cable Intermate Download Utility Program Activate New, Saved Settings with a Reboot Overview of Types of Resets Telnet Client Restore Factory Default Settings RemoteHttp Menu Configuration Page Only Http Menu Restore All Defaults Result Restore Factory Defaults Test ButtonIntermate100 General Information Desired Result LED lighting sequence Crash Recovery Intermate101 only Appendices Appendix A. Customer Support Updates and Revised Documentation Where to Find Support Gathering Information Hardware Appendix B. Technical InformationWhat the Unit Looks Like Technical Information Hardware Intermate100 Supported Printers and Performance Features USA FCC Rules Part 15, Class a Emission Notices and ApprovalsEU EMC, CE Declaration of Conformity Appendix C. Hardware Installation LED Patterns in Various Modes Programming Flash Memory Test Button to Print Main Status Pages or Quick Guide Hex Appendix E. US Ascii 7-bit Character Set Decimal Values 32 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 Basic Rules and Encoded Bytes Appendix F. String Syntax Valid Strings Examples of Valid Strings and Invalid StringsInvalid Strings Why Overall Checklist Appendix G. Configuration Checklists FTP Printer Definitions on the Host Checklist for Each Service or Host SessionPage Cannot print a job Appendix H. Troubleshooting Cannot Ping the printer Introduction Printing Environments Tools for Management and Configuration Initial Contact 113 103106 110 Configuring Print Services and Host-Sessions 151 144157 170 159173 197 178180 194 206 Appendices