Technical Information: Hardware

Complete information on the LED Patterns and TEST Button is in the appendix “Information from LEDs and from the TEST But- ton” [page 234].

On the bottom of the box is a label containing the following information:

Electromagnetic compliance. The label refers to this manual for further information; please see “USA: FCC Rules Part 15, Class A” [page 232] and “EU: EMC, CE Declaration of Conformity” [page 232].

Description of requirements for the power supply—in case you should need to replace the supply provided with the unit.

MAC Address (IEEE address; universal hardware adapter address for IP network devices). This serves as the serial number for your unit. If the label has been damaged or is missing, attach the unit to a printer (see “Hardware Installation” [page 233]) and use the Status Pages to find the MAC address.

Finally, the label tells you how to print the Status Pages (cur- rent configuration information) and the Quick Guide (on-board help; a mini-manual in txt format) by holding the TEST Button in for less than 3 seconds or at least 4 seconds, respectively. Before trying this, make sure that the unit reports Ready by displaying the green light—and only that light.

The package includes a power cable.

You will need a LAN drop cable, which is not included.

You can purchase Centronics and Mini-Centronics extension cables from us.

Intermate100 and Intermate101 Print Server Administration Manual

230

Page 230
Image 230
Intermate 100 manual Technical Information Hardware