Windows NT 4.0: Native LPR

Type in the IP address or host name of the Intermate100 in the “Name or address of...” field. If you use the host name, a mapping of the name and IP address must be entered in the hosts file. This is found in the directory

\<systemroot>\SYSTEM32\DRIVERS\ETC

The definition of <systemroot> depends on where your operating system is installed and the name given to the top- level folder. A typical <systemroot> is C:\winnt.

In the same box, enter a name for Print Queue.

If you have no special requirements, type in PAR_B. This is a “binary” queue type which will print to Logical Printer 0. See “LPR Print Queues (LPD Protocol)” [page 163] for information on permissible names and queue types.

Finish by pressing the OK button.

8You will be returned to the Printer Ports dialog box, which you will Close. This returns you to the listing of available ports.

9Choose the new port inserted in the list and click Next.

Intermate100 and Intermate101 Print Server Administration Manual

40

Page 40
Image 40
Intermate 100 manual systemroot\SYSTEM32\DRIVERS\ETC