Intermate 100 manual SCS TN3270 through PR0 Logical Printer

Processing Facilities: Data Manipulation in the Logical Printer Layer

Figure 10. SCS TN3270 through “PR0” (Logical Printer 0)

Print Handler
Printer request	HPO	Logical	Target Printer
system	Emulator	Printer
1	TN3270E	PR0
Print Client

As soon as a logical printer other than PR0 is involved, the requester must now keep track of three steps, even though it might not use all three of them.

Figure 11. shows a job sent off with a service configured to use

alogical printer which uses pre-and post-processing, but no substitution strings. For this example, we assume that the logi- cal printer involved is PR5 (as shown in the examples listed in Figure 8.).

Intermate100 and Intermate101 Print Server Administration Manual 130