| Specifications | |
ITEM | DESCRIPTION | |
|
| |
Welding Current | 30 ~ 200 amps AC | |
|
| |
Welding Capacity | For welding 24 gauge metal and thicker | |
|
| |
Duty Cycle | 100% at 120 amps; 40% at 150 amps; 25% at 200 amps | |
|
| |
Power Consumption | 220 VAC, 12 amps at 60 Hz | |
|
| |
Open Voltage | 23V at 120A; 25V at 150A; 28V at 200A | |
|
| |
Heat Control | 30 ~ 200 amps, variable | |
|
| |
Ground Cable | 8 feet with heavy duty grounding clamp | |
|
| |
Torch Power Cable | 8 feet | |
|
| |
Power Cord | ||
|
| |
Thermal Overload with Light | Automatic shutdown and restart after cooldown | |
|
| |
Wire Size | 0.030" to 0.035" | |
|
| |
Wire Spool Size | ||
|
| |
Overall Dimensions | ||
|
| |
Weight | 79 lbs. | |
|
| |
Accessories | Wheel kit, pulling handle, ground clamp, MIG torch, | |
Includes 1lb. of .032" wire | ||
| ||
|
| |
| Save This Manual |
You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep the manual and invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be followed to re- duce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1.Keep work area clean. Cluttered areas invite injuries.
2.Observe work area conditions. Do not use machines or power tools in damp or wet locations. Don’t expose to rain. Keep work area well lighted. Do not use electrically powered tools in the presence of flammable gases or liquids.
3.Keep children away. Children must never be allowed in the work area. Do not let them handle machines, tools, or extension cords.
4.Store idle equipment. When not in use, tools must be stored in a dry location to inhibit rust. Always lock up tools and keep out of reach of children.
5.Do not force tool. It will do the job better and more safely at the rate for which it was intended. Do not use inappropriate attachments in an attempt to exceed the tool capacity.
6.Do not overreach. Keep proper footing and balance at all times. Do not reach over or across running machines.
7.Dress properly. Do not wear loose clothing or jewelry as they can be caught in moving parts. Protective, electrically
REV 06/05
SKU 03664 | For technical questions, please call | Page 2 |
