Harbor Freight Tools 2433 manual Pattern Adjustment, Pressure Adjustment, Figure J- Adjustments

TURBOWAND

(33C)

FIGURE K

DETERGENT DISPENSER FILL CAP

HANDLE

(1A)

FIGURE L

Pattern Adjustment

NOZZLE

SPRAYWAND

(9C)

Pressure Adjustment

FIGURE J - ADJUSTMENTS

5. The Turbo Wand (33C) features a fixed Nozzle which increases the Pressure

Washer’s effectiveness and decreases its cleaning area, and is recommended for heavy duty cleaning of small areas. The spray pattern on the Turbo Wand is not adjustable, but provides a circular water pattern as it sprays the high pressure water. The Turbo wand must only be used on areas that cannot be cleaned with the normal nozzle and are resilient enough to withstand the increased pressure involved.

(See Figure K.)

6. The built-in Detergent Dispenser located in the Handle (1A) allows the application (USINGTHE BRUSH WAND OR SPRAY WAND LOW PRESSURE SETTING ONLY) of pressure washing detergent (not included) onto the work surface. When filling the Detergent Dispenser with pressure washing detergent, do not exceed 3 quarts of detergent. The Pressure Washer will automatically mix the detergent and water. Note: Detergent is dispensed in a 6% solution. Do not add water to the Detergent Dispenser.

CAUTION! NEVER use any products not designed for pressure washer use, nor any products with bleach, chlorine, or any other corrosive materials, including liquids containing solvents, trisodium phosphate products, ammonia, or acid-based cleaners.

Fill the Detergent Dispenser only when the unit is not running or plugged in.

(See Figure L.)

REV 08/04; 10/04

SKU 02433	For technical questions, please call 1-800-444-3353;	PAGE 13
	Troubleshooting section at end of manual.