TROUBLESHOOTING (CONTINUED)
IMPORTANT!
Be CERTAIN to shut off the Pressure Washer, release all pressure in a safe manner, and disconnect it from power and water before adjusting, cleaning, or repairing the unit.
PRESSURE WASHER WILL NOT START
Dry self thoroughly and check the voltage at the outlet, and the reset button on the GFCI power plug (explained under Controls and Features, #2 on page 12).
POWER SUPPLY
INADEQUATE
Have a certified electrician correct the problem.
RESET BUTTON NOT
SET CORRECTLY
Setup the GFCI plug as explained on page 12.
POWER SUPPLY ADEQUATE AND RESET BUTTON SET PROPERLY
If the power switch is in the ON position and lit, the Thermal safety Switch may be tripped. Switch the unit off and allow the unit to rest for
PRESSURE WASHER DOES NOT BUILD PRESSURE
Check that hose is unbent and Inlet Screen is free from debris and deposits.
HOSE IS KINKED
OR SCREEN IS
CLOGGED
Clean Screen and straighten hose. Switch to a shorter hose, if possible.
CONNECTIONS
ARE LOOSE
Retighten connections.
HOSE IS NOT KINKED AND
SCREEN IS CLEAN
Air may be getting in the water supply hose, check all connections.
ALL CONNECTIONS
ARETIGHT
Internal valves, seals, or the nozzle may be worn, contact a qualified technician.
If the steps above do not solve the problem or if the repairs involved are too
complex, contact a qualified technician.
SKU 02433 | For technical questions, please call | PAGE 23 |
