Pulley Replacement
Step 1:Remove the SCREW (#29) and the BELT COVER (#57). (See figure 7.)
Pulley
(#54)
Screw
(#29)
Belt Cover
(#51)
Belt
(#56)
Pulley
(#55)
Figure 7 — Removing the Pulley
Step 2:Remove the BELT (#56).
Step 3:Replace BELT. Make sure is tracking properly on the PULLEYS (#54 & 55) by moving
carefully by hand.
Step 4:Replace the BELT COVER and tighten SCREW securely.
Brush Replacement
Both BRUSHES (#58) must be replaced at the same time. To remove the BRUSHES do the
following:
Step 1:Remove CHIP CHUTE COVER (#51).
Step 2:Remove both BRUSH CAPS (#59).
Step 3:Remove BRUSHES from BRUSH HOLDERS (#3) and replace with new BRUSHES.
Step 4:Replace BRUSH CAPS and CHIP CHUTE COVER.
Page 10 -- SKU: 32222