WARNING: CHECK BLADE SETTING AND TIGHTNESS BEFORE INITIAL USE.

OPERATIONS

Basic Procedures

Step 1: Bring cutterhead up to full speed before engaging stock.

Step 2: The TRIGGER (#40) can be locked on using the Trigger Lock Button as shown in Figure #1. See Safety Warnings and Precautions #26.

Step 3: Use the Rear Handle to gently push the Planer. Do not force. See Figure #1.

Depth Set Knob

Rear Handle

(#36)

 

Trigger Lock

Figure 1 — Using the Planer

Step 4: The DEPTH SET KNOB (#36) controls the depth of cut. Turn counterclockwise to decrease, and clockwise to increase the cutting depth. Note that several light passes will create a finer finish than one or two deep cuts. See Figure #1.

Step 5: The DEPTH SET KNOB is also used to guide the planer when operating. Apply only light pressure.

Page 6 -- SKU: 32222

REV 12/06

Page 6
Image 6
Harbor Freight Tools 32222 Operations, Basic Procedures, Depth Set Knob Rear Handle #36 Trigger Lock, Sku