Table (adjacent to Blade slot) and tighten.
7.Reinstall the Table and secure it in place with the Screw (16).
OPERATING Instructions
Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
Tool Set Up
To prevent serious injury
from accidental operation: Turn the Power Switch of the tool to its “OFF” position and unplug the tool from its electrical outlet before performing any inspection, maintenance, or cleaning procedures.
1.Place Tile Saw on a flat and level surface. Use carpenter’s level (not supplied) to make any necessary leveling adjustments by inserting shims (not included). Slide Bench Stops (22) over plastic stands to se- cure Tile Saw against table or bench edge.
2.Use clamp (not included) to secure and support smaller work pieces to the
3.Do not force tool. Use the cor- rect tool for your application. The
correct tool will do the job better and safer at rate for which it is designed.
4.Do not use the power tool if the Power Switch does not turn it on or off. Any tool that cannot be controlled with the Power Switch is dangerous and must be replaced.
5.Disconnect Power Cord Plug from the power source before making any adjustments, changing acces- sories, or storing the tool. Such preventive safety measures reduce risk of starting the tool accidentally.
6.Store idle tools out of reach of chil- dren and other untrained persons. Tools are dangerous in the hands of untrained users.
7.Maintain tools with care. Keep tools clean. Properly maintained tools are easier to control. Do not use a damaged tool. Tag damaged tools “Do not use” until repaired.
8.Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool’s operation. If dam- aged, have the tool serviced before using. Many accidents are caused by poorly maintained tools.
9.Use only accessories that are recommended by the manufacturer for your tool. Accessories suitable for one tool may become hazardous when used on another tool.
Work Piece and Work Area Set Up
1.Designate a work area that is clean and well lit. The work area must not allow access by children or pets to prevent injury and distraction.
SKU 3733 | For technical questions, please call | Page 14 |
