4.Use tools with the lowest vibration when there is a choice between dif- ferent processes.
5.Include
6.Grip tool as lightly as possible (while still keeping safe control of it). Let the tool do the work.
7.To reduce vibration, maintain the tool as explained in this manual. If any abnormal vibration occurs, stop use immediately.
SPECIFIC SAFETY WARNINGS
1.Maintain labels and nameplates on the Tile Saw. These carry important information. If unreadable or miss- ing, contact Harbor Freight Tools for a replacement.
2.Use the right product for the right job. There are certain applications for which this product was designed. Do not use small equipment, tools, or attachments to do the work of larger industrial equipment, tools, or attach- ments. Do not use this product for a purpose for which it was not intended.
3.This product must continuously run with cold water. Dry running will cause serious damage to the Pump seals.
4.WARNING! Keeps hands and fingers away from cutting area and
Saw Blade.
5.Check Blade Guard for proper for- ward/backward movement before each use. Do not operate the Tile Saw if the Blade Guard does not move freely. Make sure the Blade Guard moves freely and does not
touch the Saw Blade or any other part of the Saw, in all angles and depths of cut.
6.Do not handle the Power Switch (4) with wet hands.
7.Make sure the Tile Saw is located on a flat, level, sturdy surface ca- pable of supporting the weight of the Saw and work pieces.
8.Always use Diamond Saw Blades (67113 4” Continuous Rim Dia- mond Blade not included, sold separately) with a 4” diameter, 5/8” round arbor hole, and rated at 4480 RPM or greater.
9.Use the Tile Saw only for cutting dry or wet ceramic tile, quarry tile, marble,
10.Do not use the Tile Saw for cutting metals or for cutting curves. This may cause the Saw Blade to break and/or reduce its service life.
11.Make sure the Saw Blade is wet at all times when cutting.
12.To reduce the risk of electrocution, keep all connections dry and off the ground. Do not touch plug with wet hands. Ground Fault Circuit In- terrupter (GFCI) protection should be provided on the circuit(s) or outlet(s) to be used for the tile saw (GFCI is not included in this machinery). Re- ceptacles are available having
SKU 3733 | For technical questions, please call | Page 5 |
