OPERATING INSTRUCTIONS
WARNING: Ensure that this item is completely and properly assembled before use. Use of this item without all guards and/or safety devices in place can result in serious Personal injury or DEATH.
NOTE: For additional references to the parts listed below, refer to the Assembly Diagram on page 18 of this manual.
The Power Switch:
To turn on the Compound Miter Saw, push in the Safety Button and squeeze the Power Switch (82). To turn off the Compound Miter Saw, release pressure on the Power Switch. (See Figure G, and Assy. Diagram.)
SAFETY BUTTON
DOWN HANDLE (#83)
POWER SWITCH (#82)
FIGURE G
To Lower The Saw Blade:
NOTE: The Compound Miter Saw automatically locks in place in the up position. To lower the Saw Blade (70), pull out on the Plastic Ball (51), and pull down on the Handle (parts #80, #83). (See Figure H, and Assy. Diagram.)
PLASTIC BALL (#51)
(PULL OUT TO LOWER SAW BLADE)
LONG SCREW (#37)
FIGURE H
REV 05/05
SKU 42654 | For technical questions, please call | Page 12 |
