Specifications
Stem Length | 15” - |
Coil | 8” Diameter |
Power Supply | Qty 3, 9 Volt Batteries |
| |
Audio | 3 distinct sounds for different |
| metals |
Weight | 3.25 lb. |
Save This Manual
You will need the manual for the safe- ty warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep the manual and invoice in a safe and dry place for future reference.
Safety Warnings and
Precautions
WARNING: When using tool, basic safety precautions should always be fol- lowed to reduce the risk of personal injury and damage to equipment.
Read all instructions before using this
product!
1.Handle the Tool carefully at all times. Dropping the Tool can cause damage to circuit boards and the case, which can cause the product to work improperly.
2.Only use and store the Tool in normal temperature environments. Extremes in temperature can shorten the effectiveness of electronic devic- es and melt or damage plastic parts.
3.Avoid electrical shock. Any metal detector may discover underground power lines, explosives or other items which when struck could cause per-
sonal injury. Do not use this product in areas where there might be under- ground electric lines or pipes buried at shallow depths. Never search in military zones where bombs or other explosives may be buried. Avoid striking any line known or suspected to be carrying electric power. Do not search any pipeline, particularly if
it could contain a flammable gas or liquid. In areas of uncertain condi- tions, use reasonable caution before using the Tool. If there is any ques- tion about a condition being safe of unsafe, do not operate the Tool.
4.Keep the Tool clean. Wipe the housing after each use. The search coil is washable and can be fully sub- merged. Never submerge the control housing. Protect the control housing from rain, blowing surf and heavy mist. Disassemble the stem and wipe it clean after use in sandy areas.
5.Dress properly. Do not wear loose clothing or jewelry as they can be caught in moving parts. Protective, electrically nonconductive clothes and nonskid footwear are recom- mended when working. Wear restric- tive hair covering to contain long hair.
6.Use the right tool for the job. Do not attempt to force a small tool or attachment to do the work of a larger industrial tool. There are certain applications for which this tool was designed. Do not modify this tool and do not use this tool for a purpose for which it was not intended.
7.Stay alert. Watch what you are do- ing, use common sense. Do not oper- ate any tool when you are tired.
SKU 43149 | For technical questions, please call | Page 2 |
