SAFETY WARNING & CAUTIONS
READ ALL INSTRUCTIONS BEFORE USING THIS TOOL!
1.KEEP WORK AREA CLEAN. Cluttered areas invite injuries. Do not use tools in damp, wet, or poorly lit locations. Don’t expose to rain. Keep work area well lit.
2.KEEP CHILDREN AWAY. Children must never be allowed in the work area. Do not let them handle machines, tools, or equipment.
3.STORE IDLE EQUIPMENT. When not in use, tools must be locked up in a dry location to inhibit rust. Always lock up tools and keep out of reach of children.
4.DO NOT FORCE THE TOOL. It will do the job better and more safely at the rate for which it was intended. Do not use inappropriate attachments in an attempt to exceed the tool’s capacities.
5.USE THE RIGHTTOOL FOR THE JOB. Do not use a tool for a purpose for which it was not intended.
6.DRESS PROPERLY. Do not wear loose clothing or jewelry, as they can be caught in moving parts. Nonskid footwear is recommended. Wear restrictive hair covering to contain long hair. Always wear appropriate work clothing.
7.DO NOT OVERREACH. Keep proper footing and balance at all times. Do not reach over or across running machines.
8.MAINTAIN TOOLS WITH CARE. Keep tools maintained and clean for better and safer performance.
SPECIAL WARNINGS WHEN USING THIS MASKING STATION
1.Wear appropriate work gloves and safety shoes when handling this cart and heavy items.
2.Be careful when handling or storing sharp tools, knives, cleaners and solvents. Each of these present their own hazards. Check with the manufacturer’s warnings and instruc- tions when using these tools and materials.
3.Keep the weight load evenly balanced on the masking station. Excessively heavy loads on the top or one side of the station may create instability, with danger of the cart top- pling over and possibly injuring a person or causing property damage.
4.Do not use solvents or flammable materials to clean this station. A mild detergent in water will be sufficient. Solvents may damage the bins and the paint; and possibly create fire hazard.
5.Be careful to avoid cutting yourself on the cutter blades, or on the edges of the paper or tape you will be working with.
SKU 45146 | For technical questions, please call | Page 3 |
