User-Maintenance

Instructions

Procedures not specifically explained in this manual must be performed only by a qualified technician.

To prevent serious injury

from accidental operation,

BEFORE ANY MAINTENANCE OR REPAIRS ARE DONE (including clearing jams):

Wear ANSI-approved safety goggles with side shields. Other people in the work area must also wear ANSI-approved impact safety goggles with side shields.

Release the trigger.

Detach the air supply.

Attempt to fire the Tool into a piece of scrap wood to ensure that it is incapable of firing any fasteners.

Empty Canister and leave it open during service.

To prevent serious injury from tool failure: Do not use damaged equipment. If abnormal noise, vibration, or air leaks is detected, have the problem corrected before further use.

To prevent explosion:

Lubricate only with specified lubricants. Lubricate air inlet using only pneumatic tool oil. Lubricate internal mechanism using only white lithium grease. Other lubricants may damage the mechanism and may be highly flammable, causing an explosion.

Note: These procedures are in addition to the regular checks and maintenance explained as part of the regular operation of the air-operated tool.

Daily - Air Supply Maintenance: Every day, perform maintenance on the air supply according to the component manufacturers’ instructions. The lubricator’s oil level needs to be maintained and the moisture filter must be regularly drained. Performing routine maintenance on the air supply will allow the tool to operate more efficiently and will also reduce wear on the tool.

Clearing Jams

To prevent serious injury

from accidental operation,

BEFORE ANY MAINTENANCE OR REPAIRS ARE DONE (including clearing jams):

Wear ANSI-approved safety goggles with side shields. Other people in the work area must also wear ANSI-approved impact safety goggles with side shields.

Release the trigger.

Detach the air supply.

Attempt to fire Tool into piece of scrap wood to ensure that it is incapable of firing any fasteners.

Empty Canister and leave it open during service.

1.Occasionally a nail may become jammed in the firing mechanism of Nailer, making the tool inoperable.

2.Remove and discard all jammed/ damaged nails from the nailer. Detach and discard all damaged or improperly collated nails from the coil. Examine the nailer for any broken, worn or damaged parts. If any part appears damaged

Page 16

For technical questions, please call 1-800-444-3353.

SKU 67450

Page 16
Image 16
Harbor Freight Tools 67450 operating instructions User-Maintenance Instructions, Clearing Jams