Harbor Freight Tools 67697 Specifications, Unpacking, Instructions for putting Into use

			Symbology
	PSI		Pounds per square inch of
			pressure
CFM			Cubic Feet per Minute flow
SCFM			Cubic Feet per Minute flow at
			standard conditions
NPT			National pipe thread, tapered
NPS			National pipe thread, straight
			Double Insulated
			Canadian Standards Association
			Underwriters Laboratories, Inc.
V~			Volts Alternating Current
	A		Amperes
			7-1/4”
		5-11/16”

Mounting Hole Pattern

Specifications

Compressor Type	Single Stage Twin Cylinder;
	Oil Lube Pump
Required HP	3 HP motor
Rated Air Pressure	145 PSI
Maximum Speed	1050 RPM
Outlet	3/4” - 16UNF
Air Delivery	6.5 SCFM @ 40 PSI
(@ 655 RPM)*	5.1 SCFM @ 90 PSI
Air Delivery	11.1 SCFM @ 40 PSI
(@ 1050 RPM)*	10 SCFM @ 90 PSI
Lubrication	Splash Type with Oil Level
	Window
	SAE 30W non-detergent Air
Oil Type	Compressor Oil
	(Sold separately)
	(SKU 95048)
Pump Pulley	12-1/2” dia. single V-groove
Belt Type	A 1397
Mounting Hole	5-11/16” x 7-1/4”
Pattern	(center-to-center)
Recommended	8mm dia, grade 5 or better
Mounting Bolts
Overall Dimensions	14-1/4” L x 10-3/4” W x 12-
	5/8” H
Sound Level	89 dB @ 1m
	(including motor noise)

*For most applications it is recommended to run this unit at the lower RPM.

Unpacking

When unpacking, make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at 1-800-444-3353 as soon as possible.

Instructions for putting

into use

Read the entire Important Safety Information section at the beginning of this

SKU 67697 For technical questions, please call 1-800-444-3353. Page 7