Sanding
1.Make sure that the surface to be sanded is wiped clean of all dirt and debris, especially that of previous courser sanding sessions, which will scratch the surface of a finer grit sanding session.
2.Attach the desired grit Sanding Disk (sold separately) onto the Backing Pad.
3.Rotate the Speed Dial to select the desired speed setting.
4.Plug the Power Cord of the Polisher/Sander into a grounded 120 volt, electrical outlet.
5.To start, grip the Polisher/Sander firmly with both hands and press in on the Safety Lock then the Trigger. Release the Safety Lock and continue to hold in the Trigger.
6.Wait until the Polisher/Sander has reached full speed, then gently contact the surface.
7.Keep heavy pressure off of the Polisher/Sander when operating. Allow the sanding disk to do the work.
8.Move the Polisher/Sander in a uniform pattern up and down or side to side as you sand to ensure even sanding.
9.Periodically, stop the Polisher/Sander and check for possible disc wear. Replace used or worn sanding discs when necessary.
10.When finished, release the Trigger and unplug the Power Cord.
11.Allow the tool to come to a complete stop before setting it down.
12.To prevent accidents, turn off the tool and disconnect its power supply after use. Clean, then store the tool indoors out of children’s reach.
Safety
Setup
Operation
Maintenance
Item 69474 | For technical questions, please call | Page 15 |
