y fet Sa
Grounding
To prevent electric shock and death from incorrect grounding wire connection:
Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provided with the tool. Never remove the grounding prong from
the plug. Do not use the tool if the power cord or plug is damaged. If damaged, have it repaired by a service facility before use. If the plug will not fit the outlet, have a proper outlet installed by a qualified electrician.
Setup
no rati Ope
Grounded Tools: Tools with Three Prong Plugs
2. The grounding prong in the plug is connected through the green wire inside the cord to the grounding system in the tool. The green wire in the cord must be the only wire connected to the tool’s grounding system and must never be attached to an electrically “live” terminal. (See
| 3. The tool must be plugged into an appropriate outlet, |
| properly installed and grounded in accordance with |
| all codes and ordinances. The plug and outlet should |
look like those in the preceding illustration. | |
| (See |
1.Tools marked with “Grounding Required” have a three wire cord and three prong grounding plug. The plug must be connected to a properly grounded outlet.
If the tool should electrically malfunction or break down, grounding provides a low resistance path to carry electricity away from the user, reducing the risk of electric shock. (See
ec
Maintenan
Double Insulated Tools: Tools with Two Prong Plugs
1. Tools marked “Double Insulated” do not require grounding. They have a special double insulation system which satisfies OSHA requirements and complies with the applicable standards of Underwriters Laboratories, Inc., the Canadian Standard Association,
and the National Electrical Code.
| 2. Double insulated tools may be used in either of the |
| 120 volt outlets shown in the preceding illustration. |
Outlets for | (See Outlets for |
Page 8 | For technical questions, please call | Item 69474 |
