ASSEMBLY AND OPERATING INSTRUCTIONS (continued)
FIGURE 3
Outer Flange (41)
Arbor Nut (40)
Inner Flange (43)
Blade (42)
4.With the Bevel Table (3) still open, wipe out the Tray (46), and then fill it with cold water, up to just below the overflow hole. The Tray (46) has 2 Drains that must always be clear of dirt or debris. Check that both the Drain and the Additional Safety Overflow Drain are unclogged prior to operation. See FIGURE 4 below.
FIGURE 4
Additional Safety
Overflow Drain
Drain
Blade (42)
Tray (46)
5.Swing back the support Arm and adjust the Bevel Table (3) to its down position.
SKU 92658 For technical questions, please call | Page 14 |
