front Belt Guard section. Loosen the four Screws (31) at the base of the Engine. Slide the Engine toward the Air Compressor to loosen tension on the V-Belt (44). Remove the old V-Belt from the Flywheel (39A) and Pulley (37). Install the new V-Belt (A47/13 x 11.94) on the Flywheel and Pulley. Then reinstall the front Belt Guard section and secure in place with the six Screws previously removed. (See

Figure G and Assy. Diagram.)

8.NOTE: Always dispose of old Engine oil and old Air Compressor oil in accor- dance with local, state, and federal regulations.

9. CAUTION! All maintenance, service, or repairs not mentioned in this manual must only be performed by a qualified service technician.

PLEASE READ THE FOLLOWING CAREFULLY

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEI- THER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACE- MENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISKS AND LIABILITY ARIS- ING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACE- MENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.

SKU 93874

For technical questions, please call 1-800-444-3353.

Page 14

Page 14
Image 14
Harbor Freight Tools 93874 operating instructions Please Read the Following Carefully, Figure G and Assy. Diagram