State of California to cause cancer and birth defects and other reproductive harm. (California Health & Safety Code 25249.5, et seq.)

2. WARNING! People with pacemakers should consult their physician(s) before using this product. Operation of electrical equipment in close proximity to a heart pacemaker could cause interference to or failure of the pacemaker.

3.WARNING! The warnings and precautions discussed in this manual cannot cover all possible conditions and situations that may occur. It must be under stood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.

UNPACKING

When unpacking, check to make sure all the parts shown on the Parts List on page 16 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.

PRE-OPERATING INSTRUCTIONS

CAUTION! Always make sure the Gasoline Engine’s Power Switch is in its “OFF” position prior to performing any service, maintenance, or cleaning of the Compressor or Engine.

To Add Engine Oil:

1.IMPORTANT! Prior to first using the Compressor, the Engine MUST be filled with a high quality 10W-30 grade engine oil.

(See Engine manufacturer’s manual for complete instructions.)

2.To do so, unscrew and remove the Engine Oil Dipstick. Pour approximately 3/4 quart of engine oil into the Dipstick Hole. Do not overfill.

3.Clean the Oil Dipstick. Then screw the Dipstick fully back into the Dipstick Hole. Unscrew and remove the Oil Dipstick again, and observe the level of engine oil on the Dipstick. The oil level should appear between the “MINIMUM” and “MAXI- MUM” indicator marks on the Oil Dipstick.

4.If necessary, continue adding engine oil, while rechecking the Oil Dipstick, until the oil level reaches the “MAXIMUM” indicator on the Oil Dipstick.

Do not exceed the “MAXIMUM” indicator mark on the Oil Dipstick.

5.When finished adding engine oil, carefully screw the Oil Dipstick back into the Dipstick Hole.

SKU 93874

For technical questions, please call 1-800-444-3353.

Page 8

Page 8
Image 8
Harbor Freight Tools 93874 operating instructions Unpacking, PRE-OPERATING Instructions, To Add Engine Oil