Harbor Freight Tools 93874 operating instructions Specific Safety Rules and Precautions, Service

damaged tools “Do not use” until repaired.

5.Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool’s operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly main- tained tools.

6.Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool may become hazardous when used on another tool.

SERVICE

1.Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel could result in a risk of injury.

2.When servicing a tool, use only identical replacement parts. Follow instructions in the “Inspection, Maintenance, And Cleaning” section of this manual. Use of unauthorized parts or failure to follow maintenance instructions may create a risk of electric shock or injury.

SPECIFIC SAFETY RULES AND PRECAUTIONS

1.WARNING! Your Warranty is voided if:

A.You do not put compressor oil in the Compressor’s crankcase prior to its first use. Before each use, check the oil level. Never run the Compressor with low or no compressor oil. Running the Compressor with low or no oil will perma- nently damage the unit.

B.You do not put engine oil in the Engine’s crankcase prior to its first use. Before each use, check the oil level. Never run the Engine with low or no engine oil. Running the Engine with low or no oil will permanently damage the unit.

C.You drop the Air Compressor. Always lift and lower the Air Compressor using its Handle.

2.Maintain labels and nameplates on the Air Compressor. These carry important information. If unreadable or missing, contact Harbor Freight Tools for a replace- ment.

3.DANGER! This Air Compressor is NOT equipped and should not be used “as-is” to supply breathing quality air. For any application of air for human consump- tion, you must fit the Air Compressor with suitable inline safety, alarm equipment, and other safety equipment (not included). This additional equipment is necessary to properly filter and purify the air to meet minimal specifications for Grade D breath- ing as described in Compressed Gas Association Commodity Specification G 7.1- 1966, OSHA 29 CFR 1910. 134, and/or Canadian Standards Associations (CSA). In the event the Air Compressor is used for the purpose of breathing air application and proper in-line safety and alarm equipment is not simultaneously used, existing

SKU 93874 For technical questions, please call 1-800-444-3353. Page 4