TABLES A and B
RECOMMENDED MINIMUM WIRE GAUGE FOR EXTENSION
CORDS* (120/240 VOLT)
NAMEPLATE
AMPERES
(at full load)
0 – 2.0
2.1– 3.4
3.5– 5.0
5.1– 7.0
7.1– 12.0
12.1– 16.0
16.1– 20.0
TABLE A
EXTENSION CORD LENGTH
25’ | 50’ | 75’ | 100’ | 150’ |
18 | 18 | 18 | 18 | 16 |
18 | 18 | 18 | 16 | 14 |
18 | 18 | 16 | 14 | 12 |
18 | 16 | 14 | 12 | 12 |
18 | 14 | 12 | 10 | - |
14 | 12 | 10 | - | - |
12 | 10 | - | - | - |
|
|
|
|
|
* Based on limiting the line voltage drop to five volts at 150%
of the rated amperes.
Symbology
Double Insulated
Canadian Standards Association
| Underwriters Laboratories, Inc. |
|
|
V~ | Volts Alternating Current |
A | Amperes |
| |
| |
n0 xxxx/min. No Load Revolutions per Minute (RPM) | |
Unpacking
When unpacking, check to make sure that all the parts are included. Refer to the Assembly section, and the Assembly Drawing and Parts List at the end of this manual.
If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual as soon as possible.
SKU 94186 | For technical questions, please call | Page 8 |
