7.Use eye and ear protection. Always wear ANSI approved impact safety goggles and ear plugs when using the Impact Driver.
8.Do not overreach. Keep proper footing and balance at all times. Do not reach over or across running machines.
9.Maintain tools with care. Keep tools sharp and clean for better and safer performance. Follow instructions for lubricating and changing accessories. The handles must be kept clean, dry, and free from oil and grease at all times.
10.Remove adjusting keys and wrenches. Check that keys and adjusting wrenches are removed from the tool or machine work surface before use.
11.Avoid unintentional starting. Be sure the switch is in the Off position when not in use. Do not carry any tool with your finger on the trigger.
12.Stay alert. Watch what you are doing, use common sense. Do not operate any tool when you are tired.
13.Check for damaged parts. Before using any tool, any part that appears damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment and binding of moving parts; any broken parts or mounting fixtures; and any other condition that may affect proper operation. Any part that is damaged should be properly repaired or replaced by a qualified technician. Do not use the tool if any switch does not turn On and Off properly.
14.Replacement parts and accessories. When servicing, use only identical replacement parts. Use of any other parts will void the warranty. Only use accessories intended for use with this tool. Approved accessories are available from Harbor Freight Tools.
15.Do not operate tool if under the influence of alcohol or drugs. Read warning labels if taking prescription medicine to determine if your judgment or reflexes are impaired while taking drugs. If there is any doubt, do not operate the tool.
16.Maintenance. For your safety, service and maintenance should be performed regularly by a qualified technician.
17.WARNING! People with pacemakers should consult their physician(s) before using this product. Electromagnetic fields in close proximity to a heart pacemaker could cause interference to, or failure of, the pacemaker.
18.Use tools with both hands when required. Many tools such as chain saws, drills, routers, etc., require the use of both hands when operating. This helps maintain tool stability and keeps hands away from the working area of the tool.
Note: Performance of this tool may vary depending on variations in tool battery power.
SKU 94371 | For technical questions, please call | Page 3 |
